Sil 3112 
RAID Controller Adapter
Silicon Image  
 
 
Tested and Approved with the following Novell products: 
NetWareŽ 6 NetWareŽ 6.5 

Product Description 
Sil 3112 SataLink/Raid HAM, 2 Channel SATA, or built in Raid 0 or Raid 1.  

Primary Driver File(s) 
SI3112.HAM (19571 bytes 09-Mar-2004 09:05 pm v2.01d)  

Driver Support File(s) 
SI3112.DDI (19571 bytes 08-Mar-2004 09:01 am v2.14)  

Test Configuration 
Product Name Sil 3112  
Hard Disk Drive 2 Silicon Image RAID 1 Set; 81.9 GB; Firmware 2.00; Serial ATA 150 (SATA150)  
Host Bus Adapter 2 Silicon Image Sil 3112A; PCI; BIOS 4.2.46; Channels 2; Chipset Sil 3112; Firmware SiI 3112; Serial ATA ; PCI.1095.3112.1095.6112.02; Version 1.21  
System IntelŽ Vero Beach; Xeon(TM) CPU 2.40GHz ; BIOS Phoenix 4.0 Release 6.0 08/15/03; PCI-ISA; Memory 512 MB  

Configuration Note(s) 
The IDE/ATA interface does not support fault tolerance.  
Vero Beach requires MPS14.PSM Ver 3.00 April 11, 2003.   

The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:  

Silicon Image 
1060 E Arques Ave 
Sunnyvale, CA 94085