Sil 3112 SATALink/RAIDSil 3112 SATALink/RAID 
      Serial ATA Device Driver / Adapter
      Silicon Image 


      Tested and Approved with the following Novell products:
      NetWareŽ 6NetWareŽ 6.5

      Product Description
      Sil 3112 SataLink/Raid Controller, 2 Channel, with built in Raid 0 and 
      Raid 1.

      Primary Driver File(s)
      SI3112.HAM(103675 bytes 09-Mar-2004 09:05 pm v2.01d)

      Driver Support File(s)
      SI3112.DDI(19571 bytes 08-Mar-2004 09:01 am v2.14)

      Test Configuration
      Product NameSil 3112 SATALink/RAID
      CD-ROM DriveIntelŽ CDU5211; Firmware YYS7; ATAPI
      Hard Disk DriveMaxtorŽ 4R080L3; 81.9 GB; Firmware RAMB54U0431; Serial ATA 
      150 (SATA150)
      MaxtorŽ 6Y080M0; 81.9 GB; Firmware YAR51BW0431; Serial ATA 150 (SATA150)
      Host Bus Adapter2 Silicon Image Sil 3112; PCI; BIOS 4.2.46; Channels 2; 
      Chipset SiI 3112; Firmware SiI 3112; Serial ATA ; 
      PCI.1095.3112.1095.6112.02; Version 1.21
      SystemIntelŽ Vero Beach; Xeon(TM) CPU 2.40GHz ; BIOS Phoenix 4.0 Release 
      6.0 08/15/03; PCI-ISA; Memory 512 MB

      Configuration Note(s)
      The IDE/ATA interface does not support fault tolerance.
      Vero Beach requires MPS14.PSM Ver 3.00 April 11, 2003.

      The term Tested and Approved applies only to the exact configuration 
      documented in this bulletin. For more information regarding the specific 
      test configuration, please contact:

      Silicon Image
      1060 E Arques Ave
      Sunnyvale, CA 94085